Insignia NS-DPF10A, NS-DPF8 Playing music on the digital picture frame, Controlling the volume, Connecting speakers to the digital picture frame, Copying multiple photos

Insignia NS-DPF8/NS-DPF10 Digital Picture Frame

Playing music on the digital picture frame	9	Select One, then press ENTER to copy the
You can choose a music file to play without		highlighted photo from memory card to
You can choose a music file to play without		built-in memory.
playing a slide show. Select the music file from		built-in memory.
playing a slide show. Select the music file from	10	Press EXIT to return to the Thumbnails
the Music screen.	10	Press EXIT to return to the Thumbnails
		screen.

Note

Music files must be standard MP3 format and not from licensed music download services.

If there are MP3 files on a memory card or in the built-in memory, you can play them on the digital picture frame.

To play music on the digital picture frame:

1Use the remote control to open the Select Mode screen, then select MUSIC. A new screen opens and lists all the music files on the selected card.

2Use or to choose a file to play.

3Press ENTER to play the file.

4Press EXIT to stop the music and return to the Music screen.

Controlling the volume

Use the remote control to adjust the volume on the digital picture frame or when playing MP3 files.

To adjust the volume:

•Press + and - buttons to adjust the volume up and down.

Connecting speakers to the digital picture frame

The digital picture frame has built-in speakers, but you can also connect it to an external amplifier and speakers.

Plug the speaker plug into the earphone jack located on the right side of digital picture frame (cable not included).

Copying photos from a memory card to the built-in memory

Copying a single photo

Use the remote control to copy a photo from a memory card to the built-in memory.

To copy a single photo:

1Press EXIT until the Select Card screen opens.

2Use or to highlight the memory card.

3Press ENTER to select the card. The Mode Selection screen opens.

4Select PHOTO, then press ENTER. The Thumbnails screen opens.

5Use or to highlight the photo you want to copy.

6Press SETUP. The on-screen setup menu opens.

7Press or to select Copy File.

8Press ENTER. A submenu appears offering three options:

Copying multiple photos

Use the remote control to copy more than one photo from a memory card to the built-in memory.

To copy multiple photos:

1Press EXIT until the Select Card screen opens.

2Use or to highlight the memory card.

3Press ENTER to select the card. The Mode Selection screen opens.

4Select PHOTO, then press ENTER. The Thumbnails screen opens.

5Use or to highlight the photo you want to copy.

6Press EXIT to return to the Thumbnails screen.

7Use the + button to select the photo. A check mark appears at the upper-left corner of the thumbnail photo. Use the - button to de-select a photo.

8After completing the photo selection, press SETUP to open the on-screen setup menu.

9Press or to select Copy File menu.

10Press ENTER. A submenu appears offering three options:

•One

•Selected

•All

11Select the Selected option, then press ENTER to copy those photos with the check mark from the memory card.

Deleting photos from the built-in memory

With the Thumbnails screen for the built-in memory displayed, photos can be deleted one or more at a time.

Note

You can not delete photos on the memory card.

Deleting a displayed photo

Use the remote control to delete a photo from the built-in memory.

To delete a photo:

1With the photo displayed on the screen, press SETUP. A setup menu opens.

2Press or to select Delete File.

3Press ENTER to delete this photo.

4Press EXIT to close the menu.

Note

It is a good idea to keep copies of the photos you copy onto your digital picture frame.

•One

•Selected

•All