Insignia NS-DRVCR Setting up your recorder, Unpacking and setup, Connecting to an antenna or cable TV, Power source, Item, Note, Button, Warning, Function

NS-DRVCR DVD Recorder/VCR

Item	Button	Function

32		DVD - Press to search
	BACKWARD	backward or forward.
	and	VCR - Press to search a tape
	FORWARD	on fast backward or forward. In
		STOP mode, press to rewind or
		advance the tape (picture not
		visible).

33	I.SKIP (instant	Press to skip ahead 30
	skip)	seconds during DVD playback.

34	0 - 9 number	Press to select numbered
	buttons	options in a menu or to enter a
		channel number directly.

35	DVD	Press to change the recorder’s
		function mode to DVD.

Setting up your recorder

Unpacking and setup

Your carton should contain:

•	DVD/VCR recorder
•	User Guide

Warning	• The system uses a polarized AC plug
	with one wide blade and one narrow
	blade. The plug will only fit into
	matching polarized power outlets. This
	is a safety feature to reduce the
	possibility of electric shock. If the plug
	will not fit in your power outlets, you
	probably have outdated, non-polarized
	outlets which should be changed by a
	qualified, licensed electrician. Do not
	file the wide blade on the plug or use
	an adapter to make the plug fit into
	your outlet. This defeats the safety
	feature and could expose you to
	electric shock.
	• Never connect the AC cord plug to
	other than the specified voltage (120 V
	60 Hz). Use the attached power cord
	only.

Connecting to an antenna or cable TV

Depending on your TV and other equipment, there are various ways you can connect the recorder. Refer to the manuals of your TV, VCR, stereo system, or other devices, as necessary, for additional information.

•	Remote control unit
•	Video cable
•	Audio cable
•	Batteries (2)

If you need to replace any of these items, call our help line mentioned in the Warranty section of this guide.

Carefully remove all the components from the carton and make sure that you have all the necessary components before you dispose of the carton.

•Remove all packing materials from the individual components.

•Do not remove any labels or stickers on the back panel of your recorder.

•Place your recorder in the location you want. Your recorder is designed to be used on a level, stable, flat surface, such as a table, desk, shelf, or stand convenient to a power outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, or vibration.

•Unwind the AC power cord on the back of your recorder and extend the cord to its full length.

Power source

Note

Flat wire (300 ohm)

300/75 ohm adapter (not supplied)

•Make sure that the recorder is connected directly to the TV and tune the TV to the correct video input channel.

•Do not connect the recorder’s AUDIO OUT jack to the Phono in jack (record deck) of your audio system. Do not connect the recorder through another VCR. The DVD image could be distorted by the copy protection system.

•The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off your recorder after removing the disc.

Antennas

Cable TV wall jack

or or

Back of recorder

Use the polarized AC line cord provided for operation on AC power. Insert the AC cord plug into a standard 120 V 60 Hz polarized AC outlet.

If you cause a static discharge when touching your recorder and your recorder fails to function, unplug your recorder from the AC outlet and plug it back in. Your recorder should return to normal operation.

Back of cable box

Cable TV wall jack