Insignia NS-DRVCR The on-screendisplay, Menu, Lock, Menu, Disc, Audio, DISPLAY, Language, Settings, Settings, Settings, Settings, Settings, Recording, Available settings

NS-DRVCR DVD Recorder/VCR

Menu	Available settings
Language	Display Menu–You can select a
Settings	language for the setup menu and
	information display.
	Disc Menu–You can select a language
	for the DVD menu.
	Disc Audio–You can select a language
	for the DVD audio.
	Disc Subtitle–You can select a language
	for the DVD subtitle.
Audio	Dolby Digital/DTS/MPEG–You can
Settings	select Bitstream (if you connect to
	equipment with Dolby Digital, DTS, or
	MPEG decoder), or PCM (to
	automatically downmix to two-channel
	PCM audio).
	Sampling Freq.–You can select 96 kHz
	or 48 kHz (if your receiver or amplifier is
	not capable of decoding 96 kHz signals).
	DRC (Dynamic Range Control)–You
	can set the DRC to On if you want to
	listen to a movie at a lower volume,
	without losing clarity.
Lock	Rating–You can select the rating
Settings	restrictions for your DVD player. Ratings
	are 1–8 (1 is the most restrictive). When
	you select this option, you must enter a
	password.
	Set Password–You can enter or change
	your password.
	Note: If you forget your password, you
	can clear the password by going to the
	Setup menu, selecting Start, then
	pressing ENTER. Input the six-digit
	number (210449), select OK when the
	message appears, then press ENTER.
	The password is cleared.
	Area Code–You can enter the area code
	whose standards were used to rate the
	DVD (see “Area code list” on page 31).
Recording	Disc Record Mode–You can set the
Settings	picture quality for recording a DVD.
	(XP=excellent, SP=standard, LP= low,
	EP=extended.)
	VCR Record Mode–You can set the
	picture quality for recording a video tape.
	(SP=standard, SLP=long play.)
	DV Record Audio–You can set this to
	choose which of two digital camcorder
	soundtracks to use. Audio 1 (to use the
	sound that was recorded when a
	recording was made), or Audio 2 (to use
	the overdubbed sound).
	Auto Chapter–You can set the auto
	chapter markings (made during
	recording) to 5 minute intervals, 10
	minute intervals, or None.

Menu	Available settings
Disc	Initialize–Formats a DVD for recording.
Settings	For DVD-RWs, you can choose VR Mode
	or Video Mode. For DVD+RWs you can
	choose OK.
	Caution: If you change the format of a
	DVD, the disc is erased.
	Finalize–Fixes the recordings in place so
	the DVD can be played on a regular DVD
	player or a computer with a suitable
	DVD-ROM drive.
	Caution: If you finalize a DVD-R or
	DVD+R, you cannot edit or record
	anything else on the disc.
	Disc Label–You can enter a name for the
	DVD. See “Naming a title” on page 27 for
	information on using the Keyboard menu.
	Disc Protect–You can protect recordings,
	depending on the type of DVD you are
	using. For DVD+RWs, it prevents editing,
	erasing, overwriting, or regular recording.
	For DVD+Rs or DVD-RWs (VR mode), it
	prevents editing, erasing, and regular
	recording. It is not compatible with
	DVD-RWs in Video mode or DVD-Rs. To
	unlock a DVD, select OFF.
	AutoPlay–Turning this ON will bypass
	the Disc menu and trailers and start
	playing the movie automatically.
	About DivX®–Provides you with a
	registration code that lets you rent and
	purchase videos using the DivX VOD
	service. For more information, visit
	www.divx.com/vod.
	Note: The videos downloaded from DivX
	VOD can only be played back on your
	recorder.

The on-screen display

Some DVDs require specific operation or allow only limited operation during playback. When

this occurs, is displayed, action prohibited or not available.

Displaying information while watching TV

While watching TV, press DISPLAY to display or remove the information displayed on-screen.

In the example a DVD-RW in VR mode is inserted.

Disc name	Record mode, free	Channel number
and format	space, and elapsed time and audio input

Audio output Date and time

Operational mode of recorder

16 www.insignia-products.com