Insignia
Selecting the TV signal source | Adding or deleting channels |
To select the TV signal source:
1Press MENU to open the
2Press VOL+ or VOL– to select the channel icon 
. The Channel menu opens.
3Press CH+ or CH– to select Antenna.
4Press VOL+ or VOL– to select TV or CATV.
Memorizing channels
After you set up your TV, you need to scan for channels in your area that have a signal. When your press the CH+ or
To memorize channels:
1Make sure that you have selected the TV signal source. For more information, see “Selecting the TV signal source” on page 10.
2Press MENU to open the
3Press VOL+ or VOL– to select the channel icon 
. The Channel menu opens.
4Press CH+ or CH– to select Auto Program.
5Press VOL+ or VOL– to start the scan. Your TV scans for available channels, and stores the channel information in memory.
Tip
After you memorize channels, you can press
SCAN to scan through the memorized channels.
If a channel was skipped when your TV memorized the channels because the signal was weak, you can add the channel to the channel list. You can also delete a channel from memory.
To add or delete channels:
1Tune to the channel you want to add or delete. If you want to add a channel, use the number buttons to select the channel. If you want to delete a channel press CH+ or CH– or use the number buttons to select the channel.
2Press MENU to open the
3Press VOL+ or VOL– to select the channel icon 
. The Channel menu opens.
4Press CH+ or CH– to select Skip.
5Press VOL+ or VOL– to add or delete the channel.
Setting the clock
To set the clock:
1Press MENU to open the
2Press VOL+ or VOL– to select the timer icon 
. The Timer menu opens.
3Press CH+ or CH– to select Clock.
4Press VOL+ or VOL– to set the hour, then press CH+ or CH– to go to the minutes field.
5Press VOL+ or VOL– to set the minutes.
10 |