![](/images/backgrounds/4439/4439-168x1.png)
Insignia
Connecting to a TV | Connecting to a digital amplifier |
If your TV has component (Y, Pb/Cb, Pr/Cr) connectors, use a component cable (not provided) to make connections. This type of connection provides the best picture.
If your TV does not have component connectors, use the A/V composite cable (provided) to make the connections.
TV | Video | Y |
|
| Input Audio R Audio L | Pb/Cb Pr/Cr |
AC power
Component connection
Composite connection
After making the digital audio connections shown in the following illustration, see “Changing audio settings” on page 12 to set up your shelf system for digital audio output.
Video connection
Standard audio connection
Digital coaxial - OR- Digital optical audio connection
TV
Notes
•Before connecting your shelf system to a TV, turn off and unplug both devices.
•If your TV has multiple ways to connect to your shelf system, use only one type of connection. Multiple connections can negatively affect picture quality.
•Do not use both analog and digital connections at the same time.
•Do not turn the shelf system on and off repeatedly. Allow a minimum of 3 seconds in between.
To connect an external digital audio device:
1Make sure that your shelf system is turned off.
2Connect one end of a digital (optical or coaxial) audio cable (not included) to the appropriate DIGITAL LINE IN jack on the external device, then connect the other end of the cable to either the DIGITAL OPTICAL or DIGITAL COAXIAL LINE OUT jack on your shelf system.
3Press STANDBY/ON to turn on your shelf system.
4Open the setup menu and set the audio output to digital (see “Changing audio settings” on page 12).
5Turn on your digital amplifier and select the correct input from your shelf system.
Connecting an iPod®
You can control iPod playback just as you control CD/DVD playback, by using the PLAY/ENTER, STOP, and direction buttons.
To connect an iPod:
1Make sure that the iPod and your shelf system are turned off.
2Insert the iPod into the dock on top of your shelf system. Press down gently on the iPod® to make sure that the docking connector on the iPod makes contact with the docking connector in your shelf system.
8 |