With converter/descrambler box

If your cable box descrambles only some channels (such as premium channels), you need a two-way splitter, an RF (A/B) switch, and four lengths of antenna cable. The two-way splitter and RF switch are not provided.

To connect cable TV with a converter/descrambler box:

•Use the following illustration as a guide to connect a converter/descrambler box.

Set the RF switch to the A position to tune to unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.

 

RF switch

 

 

 

 

Two-set signal splitter

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

Out

 

 

 

 

In

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV

Cable converter/descrambler box

Connecting cable TV via a cable TV box

1Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box.

2Depending on the jacks available on the cable box, connect a cable from the outgoing jacks on the cable box to the corresponding jacks on the back of your TV. The connection can be to the cable-out, HDMI, component video, S-Video, or AV jack.

Back of TV

ANTENNA

IN

OUT

Cable box

HDMI

Video or S-Video

Component

3If you use a component video, S-Video, or AV cable, connect an audio cable to the corresponding jacks on the back of your TV and on the cable box.

Connecting satellite TV via a satellite TV box

To connect satellite TV:

1Connect the incoming cable from the satellite wall jack to the satellite-in jack on the satellite box.

2Depending on the jacks available on the satellite TV receiver (set-top box), connect a cable from the outgoing jacks on the satellite box to the corresponding jacks on the back of your TV. The connection can be to the HDMI, component video, S-Video, or AV jack.

Back of TV

Satellite receiver

HDMI

Video or S-Video

Component

3If you use a component video, S-Video, or AV cable, connect an audio cable to the corresponding jacks on the back of your TV and on the satellite box.

Connecting a VCR

To connect a VCR:

1Connect an AV cable to the AV IN 1 VIDEO and AV IN 1 L and R audio jacks on the back of your TV.

Back of TV

VCR

2Connect the other end of the cable to the VIDEO OUT and AUDIO OUT jacks on the VCR.

Note

If a device is connected to the S-VIDEOjack, the S-VIDEOjack controls the AV IN 1 L and R jacks.

To assign the audio jacks to the AV IN 1 VIDEO jack, unplug the S-Video device.

10

www.insigniaproducts.com