To move keys to a different device mode:

1Press and hold SET until the LED blinks twice, then release.

2Press 9 9 4. The LED blinks twice.

3Press the device key that contains the function you want to move (for example, DVD).

4Press the key you want to move (such as Play).

5Press the device key that you want to move the function to. (such as TV).

6Press the key in the new mode that should perform the function (for example, Play). The LED blinks twice.

7Repeat Steps 1-6 to move additional keys.

To restore all keymoved data in a specific mode:

1Press and hold SET until the LED blinks twice, then release.

2Press 9 9 4. The LED blinks twice.

3Press the device key you wish to remove all keymoved data from twice. The LED blinks twice.

4Repeat for each device you want to restore.

To restore original key function:

1Press the device key for which you wish to remove the keymoved data from a specific key.

2Press and hold SET until the LED blinks twice, then release.

3Enter 9 9 4. The LED blinks twice.

4Press the key you wish to remove the keymoved data from twice. The LED blinks twice.

5Repeat Steps 1-4 for additional keys you wish to remove.

Programming macros

Your Insignia universal remote control includes the ability to program any key (other than the SET key) with a macro function. Each one can be set up to perform a pre-programmed set of sequential key presses with the press of a single key. A macro can be used to control a home theater operation, to set a favorite channel, or for other functions you would like to control with one key press. Each macro key can hold up to 15 key presses, total.

Note

Programming a new macro over an existing one erases the original macro.

To program a mode-independent macro:

1Press and hold SET until the red LED blinks twice, then release.

2Press 9 9 5. The LED blinks twice.

3Press the key you want to assign to a macro.

4Enter the series of commands you want the macro to execute (up to 15 commands).

5Press and hold SET until the red LED blinks twice, then release.

Now, when you press the preset macro key, the remote sends the series of commands you have entered, regardless of what mode you are in. For example, you could program a macro key to turn on both your TV and cable box and select a particular channel.

6To clear the macro, repeat Steps 1-5, but do not enter a series of commands at Step 4.

To program a mode-dependent macro:

1Press the device mode key (TV, DVD, STB, or AUX).

2Press and hold SET until the LED blinks twice, then release.

3Press 9 7 8. The LED blinks twice.

4Press the key you wish to assign to a macro.

5Enter the series of commands you want the macro to execute (up to 15 commands).

6Press and hold SET until the red LED blinks twice, then release.

Now, when you press the macro key, the remote sends the series of commands you have entered, but only if you are in the mode you selected in Step 1. For example, you could program the macro key to turn on both your TV and cable box and select a particular channel, but only if you are in TV mode. If you are in DVD mode, this key does not execute the macro you set up in TV mode.

7To clear the macro, repeat Steps 1-6, but do not enter a series of commands at Step 5.

36

www.insigniaproducts.com