Insignia NS-LCD19W-09 Using the on-screenmenus

Insignia NS-LCD19W-09 19” LCD TV

	2 Press CH+ or CH- to select to a blank record,	• Color—Set the color saturation of the
	then press ENTER to add the current	picture.
	channel to your favorites list.	• Tint—Set the color tone of the picture.
	To remove channels from your favorites list:	• Sharpness—Set the amount of detail
		enhancement of the picture.
	1 Go to the channel you want to remove, then
		• Color Temperature—SelectWarm
	press FAVORITE to open your favorites list.
		(increased red tones), Custom (to make
	2 Press CH+ or CH- to select to the record of
		your own settings), Cool (increased blue
	current channel, then press ENTER to	tones), or Standard for a balance.
	remove it from your favorites list.	• Advanced Video—Select to change
	Using the on-screen menus	advanced picture settings, which include:
		• DNR–Digital Noise Reduction. Adjust
	Use your remote control to navigate in the	to reduce the appearance of digitizing
		error caused by compression: Off,
	on-screen menus. The on-screen menus shown
		Auto, Weak, Medium, or Strong.
	in this guide may be different from those on your
		• Black Level Extender–Adjust to
	TV. These are examples to illustrate your TV’s
		increase the level of detail in black
	operation.
		areas of the picture: On or Off.

To use the on-screen menus:

1Press INPUT on the remote control to select the video source.

2Press MENU on the remote control. The on-screen menu appears.

3Press CH+ or CH- to highlight the Video, Audio, Channel, Function, or Lock icon, then press ENTER to enter the menu.

4Press CH+ or CH- highlight a setting, then press ENTER to confirm.

5Press VOL+ or VOL- to adjust the setting.

6Press EXIT to close the menu and return to normal viewing.

Adjusting picture settings

Adjusting TV picture settings

•White Peak Limiter–Adjust to increase the level of detail in white areas of the picture: On or Off.

•CTI–Color Transient Intensity. Adjust the picture to eliminate color errors: Medium, Strong, Off, and Weak.

•Flesh Tone–Adjust the flesh colors: On and Off.

•Adaptive Luma Control–Adjust the luminance of the picture: On and Off.

4Press VOL+ or VOL- to adjust the setting.

5Repeat Steps 3 and 4 to adjust the other settings.

6Press EXIT to close the menu and return to normal viewing.

Adjusting PC picture settings

To adjust TV picture settings:

1Press MENU on the remote control. The on-screen menu appears.

2Press CH+ or CH- to highlight the Video icon, then press ENTER to enter the Video menu.

3Press CH+ or CH- to highlight an option, then press ENTER to confirm. Choices include:

•Mode—Select a preset picture mode which best corresponds to your viewing requirements. Choices include Mild, Standard, Vivid, and Custom.

Note

The Brightness, Contrast, Sharpness, Color Temperature, and Tint can only be adjusted if Custom mode is selected.

When you are using a PC with your TV, a special PC option becomes available. This lets you optimize your TV’s picture settings for use with the PC.

To adjust PC picture settings:

1Press MENU on the remote control. The on-screen menu appears.

2Press CH+ or CH- to highlight the Video icon, then press ENTER to enter the Video menu.

•Brightness—Set the brightness level of the picture.

•Contrast—Set the contrast balance of the picture.