To set the function menu options:
1Press MENU on the remote control. The on-screen menu appears.
2Press CH+ or CH- to highlight the Function icon, then press ENTER to enter the Function menu.
3Press CH+ or CH- to highlight your selection, then press ENTER to go to the sub-menu (if available). Choices include:
•Language—Sets the language of the on-screen display (OSD).
•OSD Timeout—Sets the amount of time that the OSD remains on the screen. Choices include Short, Long, or Middle.
•OSD Transparency—Sets the transparency of the OSD. Choices include Low, High, and Middle. At the low setting the OSD is opaque.
•Screen Mode—Sets the aspect ratio of the display. Choices include Full Screen, Normal, Wide, Zoom, and Cinema.
•Blue Screen—Turns the Blue Screen option On or Off. With the option on, your TV screen turns blue after 3 seconds without an input signal.
•DPMS—Turns the PC Power Management option On or Off. With the option on, your TV enters standby mode if there is no signal for 2 minutes. The TV comes on automatically when signal input resumes.
•Time Setup—Opens a sub-menu which lets you set up the time options.
•Closed Caption—Opens a sub-menu which lets you set the Closed Captioning options.
•Default—Opens a dialog box which lets you choose to reset the TV settings to factory default.
4Press VOL+ or VOL- to adjust the setting (where appropriate).
5Repeat Steps 3 and 4 to adjust the other settings.
6Press EXIT to close the menu and return to normal viewing.
To set up the time options:
1Press MENU on the remote control. The on-screen menu appears.
2Press CH+ or CH- to highlight the Function icon, then press ENTER to enter the Function menu.
3Press CH+ or CH- to highlight Time Setup, then press ENTER to go to the sub-menu. The Time Setup sub-menu opens.
4Press CH+ or CH- to select an option, then press ENTER to open the sub-menu (Date/Time). Choices include:
•Time Zone—Sets the correct time zone for your area.
•Date/Time—Opens a sub-menu that lets you set the correct date and time.
•Sleep Timer—Sets the optional sleep timer. Options include Off, 5 Min, 10 Min, 15 Min, 30 Min, 45 Min, 60 Min, 90 Min, 120 Min, 180 Min, and 240 Min.
5Press VOL+ or VOL- to change the setting (where appropriate).
6Repeat Steps 3 and 4 to adjust the other settings.
7Press EXIT to close the menu and return to normal viewing.
