Insignia
•Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.)
Set the RF switch to the A position to watch unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.
RF switch | |
|
A 
B
Out 
In
TV
Cable converter/descrambler box
You can connect a VCR with a standard audio/video cable or with a
Warning
Make sure that you turn off and unplug your TV before installing devices.
Note
For better video, use the
1Plug the audio/video cable into the AUDIO L, AUDIO R, and VIDEO in jacks on the back of your TV.
2Plug the other end of the audio/video cable into the audio and video out jacks on the VCR.
| Connecting a sound system | - OR - |
1Plug the S/PDIF optical cable into the S/PDIF jack on the back of your TV.
2Plug the other end of the S/PDIF cable into the S/PDIF in jack on the sound system.
Warning
Make sure that you turn off and unplug your TV before installing devices.
Note
For home theater systems, use an S/PDIF (optical) cable to achieve full sound capabilities.
S/PDIF (optical) cable
S/PDIF IN jack
Plug in the audio cables as described above, then plug one end of an
3Turn on your TV.
4Press the INPUT button repeatedly to select Composite1 (or
5Turn on your VCR.
6Insert a videotape, then press the PLAY button.
TV |
OR
Video cable
Audio cable
Y=yellow (video)
W=white (audio left)
R=red (audio right)
Audio processor
OR
Stereo system
VCR
9 |