Insignia NS-LCD37-09 Specifications, Appendix

			Insignia NS-LCD37-09 37" LCD TV
Symptom	Possible solution		To attach a wall mount bracket to your TV:
			1 Remove the two T4 and two M4 screws
“Ghost” or double image	• This may be caused by
			holding your TV to the stand.
		obstructions to the antenna,
		such as high-rise buildings or	200 mm
		hills. Using a highly directional
		antenna may improve the
		picture quality.
Picture has a few bright	• A few bright or dark dots on an
or dark dots		LCD screen is normal. It does	Attach	mm
		not affect the operation of this	bracket
				200
		TV.	here
Remote control does not	•	Press TV.
work	• Replace the batteries. Make
		sure that the + and – symbols
		on the batteries align with the +
		and – symbols in the battery
		compartment.	Remove T4 screws	Remove M4 screws
	• Clean the remote sensor on the
		front of your TV.
	•	Bright or fluorescent lighting	Remove stand
		may interfere with the remote	2 Remove the four screws from the bottom of
		control signal. Turn off the light
		or move your TV.	the stand.
Snowy picture or noise	• Make sure that the A/V and
		antenna cables are connected
		correctly and securely.
VGA picture is not stable	• Make sure that you have
or synchronized		selected the correct VGA mode
		on your computer.
No output from one of	• Adjust the balance in the Sound
the speakers		menu.
Control buttons do not	• Unplug the power cord, wait a
work		few seconds, then plug the cord
		back in and turn on your TV.
After images appear	• Do not display a still image,		Remove 4 stand screws
		such as a logo, game, or	3 Secure the wall mount bracket to the back of
		computer image, for an
		extended period of time. This	your TV using four M6 screws, as indicated in
		can cause a permanent after	the illustration in Step 1.
		image to be burned into the	Specifications
		not covered by your warranty.
		screen. This type of damage is

Appendix

Wall-mount hardware (sold separately) lets you mount your TV on a wall.

For detailed information on mounting your TV on a wall, see the instructions provided with the wall-mount hardware.

Contact a technician for assistance when installing the wall-mount bracket. Best Buy is not responsible for any damage to your TV or injury to yourself or others.

We suggest that you keep your TV at least

2.36inches (60 mm) from the wall to prevent cable interference.

Before you wall-mount your TV, you need to remove the base.

Design specifications are subject to change without notice.

Analog standard	NTSC
Digital standard	ATSC, 8-VSB, Clear-QAM
Screen	37-inch
Channel coverage	•	VHF: 2-13
	•	UHF: 14-69
	• CATV: Mid band - A-8 ~ A-1, A ~ I
	• Super band - J ~ W
	• Hyper band - AA ~ ZZ, AAA, BBB
	• Ultra band - 65 ~ 94, 100 ~ 135
Power source	AC 100~240 V 50/60 Hz
Power consumption	Active: <200 W
	Standby mode: <1 W
Audio power	10 W + 10 W internal speaker
S-Video input	Y: 1 V(p-p), 75 ohm, negative sync
	C: 0.286 V(p-p) (burst signal), 75 ohm
Video/audio input	Video: 1 V(p-p), 75 ohm, negative sync
	Audio: 500 mV(rms)

14 www.insignia-products.com