Insignia NS-LCD47HD-09 11

Insignia NS-LCD47HD-09 47” LCD HD TV

To add or delete channels:

Adding a channel label

1Press MENU. The Main OSD (On-Screen

	Display) menu opens with Setup highlighted.		To add a label to a channel:
2	Press	to enter the sub-menu, then press	1	Press MENU. The Main OSD (On-Screen
				Display) menu opens with Setup highlighted.
	or	to highlight Manual Channel Set. The
			2	Press	to enter the sub-menu, then press
	Channel Setup Table opens.
3	Press	or to select a channel, then		or	to highlight Channel Labels. The
				Channel Label menu opens.
	press ENTER to toggle between viewable
			3	Press	or to move the cursor to the
	and not viewable.
4	Press MENU or EXIT to close the menu.			channel field or label field, then press or
				to select a channel while the cursor is in

Changing channels				the channel field, or press or to select
				the character while the cursor is in the label
To change channels:				field.
•	Press CH – or CH + on the remote control to		4	Press ENTER to return to the previous menu.
	go to the next lower or higher channel.		Freezing the picture
	- OR -
			You can freeze (still) the screen image.
	Press the number buttons to directly select a
	channel (for example, if you want channel 83,
	press 8, then press 3).			Caution
	- OR -			To protect your TV, do not freeze the screen image
				for long periods of time.
	Press RECALL to go to the last viewed
			To freeze or unfreeze the picture:
	channel.
			•	Press FREEZE.

Selecting a digital sub-channel

Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program. The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast.

For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or 8-3.

To select a sub-channel:

1Press the number buttons for the main channel (for example 8).

2Press –, then press the sub-channel button (for example 1).

Adjusting the volume

To adjust the volume:

•Press VOL – or VOL + to decrease or increase the volume.

•Press MUTE to turn off the sound. Press MUTE again to turn the sound back on.

Displaying status information

To display status information:

•Press DISPLAY. Your TV displays status information, such as the channel number or signal source.

Checking the DTV signal strength

To check the DTV signal strength:

1Press MENU. The Main OSD (On-Screen Display) menu opens with Setup highlighted.

2Press to enter the sub-menu, then press or to highlight DTV Signal. The DTV Signal meter opens.

3Press MENU or EXIT to close the menu.

Setting the clock

To set the clock:

1Press MENU. The Main OSD (On-Screen Display) menu opens with Setup highlighted.

2Press or repeatedly to highlight Feature. The Feature menu opens.

ENTER

3Press to enter the sub-menu, then press or to highlight Time Set. The Time Set menu opens.

4Press or to move to the different fields, then press or to change the settings.

5Press MENU or EXIT to close the menu.