Insignia NS-LCD47HD-09 Setting up your TV

									Insignia NS-LCD47HD-09 47” LCD HD TV
							3 Replace the cover.
#	Button					Description
20	CH			or		Press to change TV channels.		Notes
									• Do not mix batteries of different types.
21	FAVORITE					Press to toggle the Favorite/Normal mode.
									• Do not mix old and new batteries.
						See “Setting up the channel list” on page
									• Remove batteries when the charge is depleted.
						10 for more information.
									• Battery chemicals can cause a rash. If the
22	DISPLAY					Press to display status information.			batteries leak, clean the battery compartment
									with a cloth. If chemicals touch your skin, wash
23	EXIT					Press to close the on-screen menu.
									immediately.
24	FREEZE					Press to freeze the video image. Press			• If the remote control is not going to be used for
						again to unfreeze the image. Do not freeze			an extended period of time, remove the
						the video image for long periods of time.			batteries.
						You may damage the TV screen.
							Connecting your TV to a power outlet
25	PICTURE					Press to select the brightness or contrast
						adjustment. Lets you adjust the brightness	To connect your TV to a power outlet:
						and contrast without opening the on
								• Plug the power cord into a power outlet.
						screen menu.
Using the remote control
								Notes
	To use the remote control:								• Make sure that you use the correct type of
									power. See the label on your TV.
	• Point the remote control towards the remote								• If you do not intend to use your TV for an
			sensor on the front of your TV.						extended period of time, unplug the power cord
									from the power outlet.
		Notes
							Connecting an outside antenna
				• Do not expose the remote control to shock or
					liquids.		Antenna cables come in two types: 75 ohm and
				• Do not use the remote control in an area with
							300 ohm.
					high humidity.
				• Do not place the remote control in direct					75 ohm cable
					sunlight.
				• Do not place objects, such as furniture,
					between the remote control and the remote
					sensor.

•The remote control may not work if direct

sunlight or bright light shines on the remote	300 ohm cable
sensor. Either move your TV or change the
angle at which you use the remote control.

Setting up your TV

Installing remote control batteries

To install the remote control batteries:

1Remove the battery cover.

2Insert two AAA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.

•If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV.

•If your antenna cable has a 300 ohm connector, connect the cable to a

300-75 ohm adapter (not included), connect the adapter to a 75 ohm cable, then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV.

Connecting cable TV

Your TV has a 75 ohm jack for connecting cable TV.

Some cable TV providers scramble the signals for “premium” (pay) channels. To view these channels, you need a converter/descrambler box.

If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descrambler box, contact your cable TV provider.

To connect cable TV without a converter/descrambler box:

1Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV.

2Connect the other end of the cable to the cable TV wall outlet.

8 www.insignia-products.com