Insignia NS-LCD52HD-09 52” LCD HD TV

For information on operating the external

Connecting a computer

signal source, refer to the user guide for that

 

 

device.

 

Warning

 

 

 

 

Make sure that you turn off and unplug your TV

 

 

before installing devices.

 

 

Note

 

 

Many newer computers have HDMI output.

TV

To connect a computer using VGA:

 

 

1

Plug a VGA cable from your computer into

 

 

the VGA jack on the back of your TV.

 

2

Plug an audio cable from your computer’s

 

 

audio out jack into the AUDIO jack on the

 

 

back of your TV.

 

3

Plug in and turn on your TV.

 

4

Press the INPUT button repeatedly to select

 

 

the VGA input source.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

SPDIF

When using an HDMI-DVI adapter to pass the DVI signal to HDMI input, use the L/R connector to the right side of HDMI1 as audio input.

Headphone jack

3

HDMI jack

S-Video and composite video input

Audio input

VGA cable

Note

When the computer goes into standby mode, your TV turns off. If your TV does not turn on when you “wake” your computer, press the POWER button on your TV or remote control.

Using your TV

Turning your TV on and off

To turn your TV on and off:

1Make sure that the power cord is connected to your TV and a power outlet.

2Press the button to turn on your TV. The power indicator LED turns blue.

3Press the button again to return your TV to standby. The power indicator LED turns red.

10

www.insignia-products.com