Insignia
Connecting a DTS decoder | Connecting an MPEG audio decoder |
You can connect your TV combo to an amplifier equipped with a DTS decoder or processor to listen to DVD audio or audio CDs in DTS sound.
You can connect your TV combo to an amplifier equipped with a MPEG decoder or processor to listen to DVDs in MPEG2 sound.
1 | 1 |
CR / PR | Y | AUDIO | CR / PR | Y | AUDIO |
|
| L |
|
| L |
|
| R |
|
| R |
COAXIAL | CB / PB | INPUT | COAXIAL | CB / PB | INPUT |
|
|
|
|
2
3
Amplifier with DTS decoder
2
3
Amplifier with MPEG2 audio decoder
To connect to an amplifier equipped with a DTS decoder:
1Remove the port cover on the back of your TV combo.
2Plug a coaxial cable (2) into the DTS jack on the amplifier, then connect the other end of the cable into the COAXIAL OUTPUT
jack (1) on the back of your TV combo.
To connect to an amplifier equipped with an MPEG audio decoder:
1Remove the port cover on the back of your TV combo.
2Plug a coaxial cable (2) into the MPEG jack on the amplifer (3), then plug the other end of the cable into the COAXIAL OUTPUT
jack (1) on the back of your TV combo.
9 |