Connecting a computer

Insignia NS-LTDVD32-09 32” LCD TV/DVD Combo

3Press INPUT, then press / to select HDMI2.

To connect a computer using VGA:

1Plug a VGA cable (4) into the VGA port on the computer (6) and into the VGA INPUT port on the back of your TV.

2Plug an audio cable (5) into the audio jack on the computer (6) and into the AUDIO VGA INPUT port on the back of your TV.

3Turn on your TV.

4Press INPUT, then press / to select PC.

Caution

The TV will automatically turn off after one minute if there is no signal in PC mode.

To connect to a computer or other HDMI device using the HDMI1 jack:

1Plug an HDMI cable (2) into the HDMI port on the HDMI device (3) and into the HDMI1 INPUT port on the back of your TV.

2Turn on your TV.

3Press INPUT, then press / to select HDMI1.

Note

When the computer goes into standby mode, your TV turns off. If your TV does not turn on when you “wake” your computer, press the POWER button on your TV or remote control.

Using the basic controls

Turning the TV on and off

To turn your TV on and off:

1Press POWER on the side of your TV or on the remote control. The POWER/STANDBY indicator turns blue.

2To turn off your TV, press POWER again. The POWER/STANDBY indicator turns red.

Adjusting the volume

You can adjust the volume using the controls on your TV's side panel or the remote control.

To adjust the volume:

1Press VOL+ or VOL- to increase or decrease the volume.

2Press MUTE to mute the sound, then press this button again to restore the sound.

Changing the video mode

Your TV supports multiple video modes.

To select the video mode:

Press INPUT one or more times to select the video mode, then press ENTER. You can select:

TV

AV1

AV2

S-Video1

S-Video2

Component

DVD

HDMI1

HDMI2

PC (VGA)

To connect to a computer or other HDMI device using the HDMI2 jack:

1Plug an HDMI cable (8) into the HDMI port on the HDMI device (3) and into the HDMI2 INPUT port on the side of your TV.

2Turn on your TV.

12

www.insignia-products.com