Insignia NS-MG1205-C

68” METAL AND GLASS TV STAND

www.insigniaproducts.com

Step 3: Attaching the side bases to the back base

1From the inside of the back base (C), insert short screws (M) through the screw holes on the tabs and into the

screw holes on the left base (D). On the back base (C), make sure that the suction cups (O) face up and the screw

holes face out. Use the Allen wrench (Q) to tighten the screws.

2Repeat this step to attach the right base (E) to the back base (C).

Make sure that

these holes face up.

You’ll need:

M (4) Q (1)

NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 7 Wednesday, April 30, 2014 3:29 PM