Insignia NS-MG1205-C

68” METAL AND GLASS TV STAND

www.insigniaproducts.com

Step 4: Attaching the left and right bases to the front support

• Slide the ends of the left base (C) and right base (E) into the openings on the front support (A). Make sure that the

two screw holes on the bottom of each base and the screw hole on the side of each base align with the screw

holes in the front support frame (A). Insert a short screw (M) through each of the six screw holes (three holes on

each base), then use the Allen wrench (Q) to tighten the screws.

You’ll need:

M (6) Q (1)

NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 8 Wednesday, April 30, 2014 3:29 PM