Insignia NS-P10DVD11 Using your player, Playing a DVD or audio CD, Controlling DVD or audio CD playback, OPEN, OPEN, STOP, STOP, NEXT, NEXT, POWER, To play a disc:

Insignia NS-P10DVD11 10” Portable DVD Player

Using your player

Playing a DVD or audio CD

Notes

•Most DVDs and your player have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging.

•In disc playback Pause/Stop or disc tray Open state, the player will go to standby(power saving) mode if there is no operation for about 5 minutes. To turn the player back on, press any key on the remote control to activate.

To play a disc:

1Make sure that your player is connected to power.

2Slide the POWER switch to the ON position.

3Slide the OPEN switch to the right. The disc tray opens. For the location of the OPEN switch, see “Top” on page 7.

4Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing automatically.

Controlling DVD or audio CD playback

To control disc playback:

•Press (STOP) once to stop playback. Your player remembers where you stopped. If you press , your player starts playing at the point where you stopped.

•Press (STOP) twice to stop playback. If you press , your player starts playing at the beginning of the disc.

Note

When playing an audio CD, press STOP once to stop playback and return the player to the beginning of the CD.

•Press to pause playback. Press this button again to resume playback.

•Press on the remote control or press and hold (NEXT) to fast-forward the disc. Each time you press this button, the fast-forward speed changes from 2 to 4 to 8 to 16 to 32 times the normal speed.

•Press to fast-reverse the disc. Each time you press this button, the fast-reverse speed changes from 2 to 4 to 8 to 16 to 32 times the normal speed.

•Press (NEXT) to go to the next title, chapter, or track.

12www.insigniaproducts.com