Insignia NS-PDVD9 manual 8

			Insignia NS-PDVD9 Portable DVD Player
Connecting your player to a television		4	Press the or button to select the sub
	You can connect your player to a television to		menu, then press ENTER to confirm your
			selection.
	enjoy high quality stereo sound and picture on a
		5	Repeat steps 2-4 for other menus.
	larger screen.
		6	Press SETUP again to exit the Setup Menu.

To connect your player to a television:

1Slide the AV In/Out switch to the Out position.

2Plug the audio/video cable’s black plug into the player’s DVD AV jack.

3Plug the other end to the AUDIO and VIDEO INPUT jacks on your television or monitor as follows:

•white = left audio

•red = right audio

•yellow =video

Note

An optional wired headphone may be used with the player. Plug in the headphone to either the Headphone 1 or Headphone 2 jack on the right side of the player. Plugging the headphone into the Headphone 1 jack turns off the internal speakers.

Connecting your player to a video camera

You can connect your player to a video camera or other external video source to enjoy high quality stereo sound and picture on your player’s LCD screen.

To connect your player to an external video source:

1Slide the AV In/Out switch to the In position.

2Plug the audio/video cable’s black plug into the player’s DVD AV jack.

3Plug the other end to the AUDIO and VIDEO OUTPUT jacks on your video camera or other external video source as follows:

•white = left audio

•red = right audio

•yellow =video.

Note

Do not connect an external video source using the AV jack when the AV In/Out switch is in the Out position.

Using the setup screens

To use the setup screens:

1Press the SETUP button with no disc inside the player. The General Setup Page appears

and is highlighted.

2Press the or button to select a menu.

3Press to enter a sub menu or press to return to the previous menu.

Menu	Submenu	Options
General	TV Display	Normal/PS: When the
		player outputs a signal
		to a normal TV, a normal
		picture is shown on the
		full screen.

Normal/LB: When the player outputs a signal to a normal TV, a normal picture is shown on the screen with a black strip at both the top and bottom of the screen.

		Wide: When the player
		outputs a signal to a
		wide screen TV, a wide
		picture is shown on the
		full screen.
	Angle Mark	On: The screen shows
		the angle mark icon. (If
		an angle option is
		available).
		Off: The screen will not
		display the Angle Mark.
		NOTE: Not all discs
		contain this feature. This
		feature is disc
		dependent.
	OSD Lang	You can choose English,
		French, or Spanish as
		the language for the
		setup menus.
	Screen Saver	On: Turns on the screen
		saver. The DVD player
		enters the Screen Saver
		mode after
		approximately five
		minutes if the same
		image remains on the
		screen.
		Off: Turns off the screen
		saver.
	Last Memory	On: The player returns to
		the last played position
		on the disc after you
		press STOP once.
		Off: The player does not
		return to the last played
		position on the disc.
		NOTE: The last played
		position memory
		function is only effective
		for OPEN operation.
Video Quality	Brightness	Adjust the screen
		brightness.
	Contrast	Adjust the screen
		contrast.
	Hue	Adjust the screen hue.
	Saturation	Adjust the screen
		saturation.

8 www.insignia-products.com