6
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth
www.insigniaproducts.com

Installing or replacing the remote control

battery

1Open the battery cover latch on the remote
control.
2Remove the old battery (if necessary) and insert
the new 3V lithium battery (CR2025) into the
battery tray. Match the polarity of the new
battery with the plus sign (+) in the battery tray.
3Slide the battery tray back into the battery
compartment until it clicks into place.
Setting up your soundbar

Connecting the soundbar (required)

Choose one connection option shown below that
fits your audio source device, such as a TV,
DVD/Blu-ray player, or gaming console. You can
connect several devices and switch the sound
source as required.
Digital connections (best)
1Connect one end of the digital optical cable (not
included) to your soundbar. Connect the other
end into the Digital Optical Output port on
your audio source device.
2Change the device’s audio output to 'PCM'
format (typically found in audio settings). Refer
to the documentation that came with your
audio source device for more information.
3After connecting power, see “Using your
soundbar” on page 10.
AUX IN connections (good)
1Connect the right-angled end of the 3.5 mm
audio cable to your soundbar. Plug the other
end into the Audio Output port or headphone
jack on your audio source device.
2After connecting power, see “Using your
soundbar” on page 10.
Cautions
The battery should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
Battery chemicals can cause a rash. If the battery
leaks, clean the battery compartment with a
cloth. If chemicals touch your skin, wash
immediately.
Make sure that the battery is disposed of
correctly. Do not burn or incinerate.
Notes
Do not mix old and new batteries.
Remove the battery when the charge is
depleted.
If the remote control is not going to be used for
an extended period of time, remove the battery.
Caution
Turn off or unplug all devices while you are
making connections.
If you mounted your soundbar on a wall, you
must use the included right-angle cable
connectors for the AUX IN or RCA cable
connections.
Audio
Quality Jack Type Cable
Best
Digital optical cable (not included)
Good
3.5 mm audio cable (included)
Good
RCA audio cable (included)
Pull
Squeeze
Note
If you use the OPTICAL connection, change the
device’s audio output to “PCM” format. Refer to the
manual you received with the output device for
additional information.
Digital optical cable
(not included)
Backpanel of the soundbar
3.5 mm audio cable (provided)
TV, CD, MP3 player, smartphone, etc.
Backpanel of the soundbar
Note: Some TVs may only have this
type of connection available.
NS-SB314_14-0307_MAN_V2_ENG.book Page 6 Friday, March 14, 2014 8:50 AM