Insignia NS-SB314 Mounting your soundbar on a wall (optional)

NS-SB314 Soundbar Home Theater Speaker System with Bluetooth

www.insigniaproducts.com

Mounting your soundbar on a wall (optional)

You wi ll nee d:

1Select a location close to your TV and directly in

front of the viewing/listening position. For best

sound quality, choose a location where sound

waves are not blocked by furniture or other

obstacles.

2Position the supplied wall mount template to

the wall where you want to mount the

soundbar. Make sure the template is level (A),

then tape the template to the wall (B).

3Drill two holes into the wall, where the template

indicates, then remove the template.

4Install wall anchors (not included) into the holes

you drilled, using the instructions that came

with your anchors.

5Secure two screws (not included) to the wall or

wall anchors (if required). The screws must

protrude from the wall by about 1/4”. Use a #10

wood screw (or similar), 1 1/2" in length. The

screw width must be about 3/16” and the screw

head must be approximately 1/4” to 3/8”.

6Align the speaker hanging brackets with the

screws, then hang the soundbar on the screws.

Notes

• If you have drilled into a stud, wall anchors are

not required.

• If you cannot drill into wall studs and must drill

into drywall, concrete, or another type of wall,

wall anchors are required. See the instructions

that came with your wall anchors to determine

the drill bit size.

V1 14-0130LEVELING EDGELEVELING EDGEDrill a hole hereDrill a hole here

Approx. 1/4 in

(6.8 mm)

Wall

20.43 inches (519 mm)

Tools Needed

Drill two holes in the wall where the template indicates,

then remove the template.

Wall

Soundbar

If you are mounting on drywall or concrete, insert wall

anchors (not included) into the holes and use a hammer

to make sure that the anchors are ﬂush against the wall.

Align the speaker hanging brackets with the screws,

then hang the soundbar on the screws.

Position the wall mount template on the wall where you

want to mount your soundbar, level the template, then

tape it to the wall.

Note: Make sure that the template is level.

Select a location close to your TV and directly in

front of the viewing/listening position. For best

sound quality, choose a location where sound waves

are not blocked by furniture or other obstacles. Wall

Anchor

Wall

Screws (2) - #10 x 1 ½"wood screw (or similar)Hold a level to the Leveling Edge of this templateWall mount templatePosition holes onto studs behind drywall or use anchors for mountingWarning: Improper installation can result in serious injury or damage to your soundbar. If necessary, seek the assistance of a professional.Wall anchors (2)

Secure two screws (not included) to the wall or wall anchors

(if required). The screws must protrude from the wall by

about 1/4". Use a #10 wood screw (or similar), 1 1/2" in

length. The screw width must be about 3/16" and the screw

head must be approximately 1/4" to 3/8".

Wall mounting template Level Stud finder

(optional for

wood stud

installation)

Drill and

drill bit

Hammer Screwdriver

Tape mea sur e

Tape

Screws (2) - #10 x 1 ½”

wood screw (or

similar)

Wall anch ors ( 2)

BA

V1 14-0130LEVELING EDGELEVELING EDGE

Drill a hole here

Approx. 1/4 in

(6.8 mm)

Wall

20.43 inches (519 mm)

Tools Needed

Drill two holes in the wall where the template indicates,

then remove the template.

Wall

Soundbar

If you are mounting on drywall or concrete, insert wall

anchors (not included) into the holes and use a hammer

to make sure that the anchors are ﬂush against the wall.

Align the speaker hanging brackets with the screws,

then hang the soundbar on the screws.

Position the wall mount template on the wall where you

want to mount your soundbar, level the template, then

tape it to the wall.

Note: Make sure that the template is level.

Select a location close to your TV and directly in

front of the viewing/listening position. For best

sound quality, choose a location where sound waves

are not blocked by furniture or other obstacles. Wall

Anchor

Wall

Secure two screws (not included) to the wall or wall anchors

(if required). The screws must protrude from the wall by

about 1/4". Use a #10 wood screw (or similar), 1 1/2" in

length. The screw width must be about 3/16" and the screw

head must be approximately 1/4" to 3/8".

V1 14-0130LEVELING EDGELEVELING EDGE

Drill a hole here

Approx. 1/4 in

(6.8 mm)

Wall

20.43 inches (519 mm)

Tools Needed

Drill two holes in the wall where the template indicates,

then remove the template.

Wall

Soundbar

If you are mounting on drywall or concrete, insert wall

anchors (not included) into the holes and use a hammer

to make sure that the anchors are ﬂush against the wall.

Align the speaker hanging brackets with the screws,

then hang the soundbar on the screws.

Position the wall mount template on the wall where you

want to mount your soundbar, level the template, then

tape it to the wall.

Note: Make sure that the template is level.

Select a location close to your TV and directly in

front of the viewing/listening position. For best

sound quality, choose a location where sound waves

are not blocked by furniture or other obstacles. Wall

Anchor

Wall

Secure two screws (not included) to the wall or wall anchors

(if required). The screws must protrude from the wall by

about 1/4". Use a #10 wood screw (or similar), 1 1/2" in

length. The screw width must be about 3/16" and the screw

head must be approximately 1/4" to 3/8".

Caution

Make sure that you use wall anchors that are suitable

to your wall type if you need to mount the soundbar

to drywall, concrete, or similar wall type.

Warning

Improper installation can result in serious injury or

damage to your soundbar. If necessary, seek the

assistance of a professional.

Approx. 1/4 in

(6.8 mm)

Wall

20.43 inches (519 mm)

NS-SB314_14-0307_MAN_V2_ENG.book Page 9 Friday, March 14, 2014 8:50 AM