5
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth
www.insigniaproducts.com
Remote controlUsing the remote control
1Remove the plastic tab from the battery
compartment before using the remo te control
for the first time.
2Point the remote control directly at the IR s ensor
on the front of the soundbar. You must be
within approximately 23 ft. (7 m) of the
soundbar.
#Component Description
1 (Power) button Press to turn on the soundbar. Press again to put the soundbar into standby mode.
2SOURCE buttons Press to select the sound source for your soundbar:
• Source 1 - Optical
• Source 2 - AUX IN
• Source 3 - RCA
• - Bluetooth
3DSP buttons Press to select the Digital Signal Processor (DSP) sound mode:
•Standard
•Theater
•News
The corresponding indicator on the soundbar top panel lights to indicate the sound mode
selected.
4 (Mute) button Press to mute the sound from the soundbar. Press again to restore the sound.
5VOL +/– buttons Press to increase or decrease the volume of the soundbar.
6BASS button Press to activate the bass frequency enhancement.
IR Sensor
Cautions
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet
surface.
• Do not place the remote control in direct
sunlight or near sources of excessive heat.
• If you are not going to use the remote control
for a long time, remove the battery to avoid any
damage that may be caused by leakage and
corrosion.
NS-SB314_14-0307_MAN_V2_ENG.book Page 5 Friday, March 14, 2014 8:50 AM