STEP 2 - Select screws, washers, and spacers
1Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV requires, test various sizes by hand threading the screws.
Select one of the following types of screws:
For a TV with a flat back:
M4 X 12mm screws (D)
M5 X 12mm screws (I)
M6 X 12mm screws (K)
M6 X 20mm screws (L)
M8 X 16mm screws (N)
M8 X 20mm screws (O)
For a TV with an irregular/obstructed back:
M4 X 35mm screws (E)
M5 X 35mm screws (J)
M6 X 35mm screws (M)
M8 X 35mm screws (Q)
Select either an M4/M5 washer (F) or an M6/M8 washer (G)
For an irregular or obstructed TV back, also use Spacer (H)
CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount.
| Screw fits |
| Screw is too | Screw is too | |||||
| correctly |
| short | long | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2Remove the screws.
3For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back“ on page 7.
For an irregular or obstructed back, go to “STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs” on page 8.
6www.insigniaproducts.com
