NS-VDVD1 Vertical DVD player

To play a disc using slow forward or slow reverse (not available for CDs or MP3s:

1When playing a CD, press or to play the disc in slow motion forward or reverse.

2Press the same button again to increase the speed forward or back.

3Press Play to resume playback.

To adjust the volume:

•To adjust the volume, press the VOL + or – button.

To stop playback:

1Press Stop to stop playback.

2Press Play to resume playback at the point where the disc was stopped.

3Press Stop twice to stop the playback of DVD discs completely.

Notes

• “ “ may appear on the TV screen during operation. This

 

means that the operation is not permitted by the player or the

 

disc.

•When the screen saver is on, you can press any key to return to player operation. To disable the screen saver, set Screen Saver to OFF in the General Setup Page of the System Setup.

Using advanced playback options

The following playback options are for DVDs. Operation and display on the screen may be different for other disc formats. Use the remote control to activate these options.

HD–Press to switch to HD (high definition) output and select the resolution from the following: 576p, 720p, or 1080i.

DISPLAY–Press to cycle through “title elapsed,” “title remain,” “chapter elapsed,” “chapter remain,” and “display off.”

SEARCH–Press once to display the Search menu. With the Search menu open, press or to select an item to search for, then press press ENTER to confirm. Press SEARCH again to cancel search mode.

REPEAT–Press to repeat the Chapter, press it again to repeat the Title, press it a third time to repeat All, and press it again to cancel repeat.

A-BREPEAT–Press to select a starting point (A), press it again to set an end point (B) and complete the setting. The selected section is repeated. Pressing A-B REPEAT a third time will cancel this function.

PROGRAM–When playing a disc, press this button to enter program mode. Use the number keys enter the program number that you want. When your program is completed, move the cursor to select START.

The program starts. Press Stop, then ENTER to stop the program.

18www.insignia-products.com