Insignia NS-WBRDVD3 VIDEO IN, VIDEO IN, ETHERNET, VIDEO OUT, VIDEO OUT, Wired connection, COAXIAL AUDIO IN, COAXIAL AUDIO OUT, OPTICAL DIGITAL IN, OPTICAL DIGITAL OUT

Wireless 3D Connected Blu-ray Disc Player

Connecting an amplifier with digital optical audioTo connect an amplifier with digital optical audio:

1Connect a video cable (not included) to the VIDEO OUT jack on the back of your player and to the VIDEO IN jack on the TV.

Note

You can connect an HDMI cable (not included) to the

HDMI OUT jack on the back of your player and to the

HDMI IN jack on the TV instead of using the VIDEO

OUT jack.

TV	Back of player

Amplifier

Connecting to the InternetWired connection

Using a wired network provides the best performance because the attached devices connect directly to the network and are not subject to radio frequency interference.

Notes

•When plugging or unplugging the Ethernet cable, hold the plug portion of the cable.

•When unplugging, do not pull on the Ethernet cable. While pressing down on the cable lock on the plug, pull the plug out of the jack.

•Do not connect a modular phone cable to the ETHERNET jack.

•Connection configurations vary based on the specifications of your Internet service provider. Contact your provider for specific instructions about setting up your wired connection.

	Digital optical
Video cable	audio cable
Video cable

2Connect a digital optical audio cable (not included) to the OPTICAL DIGITAL OUT jack on the back of your player and to the OPTICAL DIGITAL IN jack on the amplifier.

Connecting an amplifier using digital coaxial audioTo connect an amplifier using digital coaxial audio:

1Connect a video cable (not included) to the VIDEO OUT jack on the back of your player and to the VIDEO IN jack on the TV.

Note

You can connect an HDMI cable (not included) to the

HDMI OUT jack on the back of your player and to the

HDMI IN jack on the TV instead of using the VIDEO

OUT jack.

TV	Back of player

Amplifier

To connect to the Internet using a wired connection:

1Make sure that your player is turned off and the power cord is unplugged.

2Connect a network cable to the ETHERNET jack on the back of your player and into a wired router using a commercially available LAN or Ethernet cable.

For instructions on configuring a wired Internet connection, see “Configuring a wired Internet connection” on page 21.

Video cable

Digital coaxial audio cable

2Connect a digital coaxial audio cable (not included) to the COAXIAL AUDIO OUT jack on the back of your player and to the COAXIAL AUDIO IN jack on the amplifier.