Insignia User Guide Troubleshooting, Problem, Solution, Storing discs, Cleaning discs, Handling discs, Cleaning the cabinet, Care and handling of discs

Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo

5 Secure the pedestal stand with four M4	Cleaning discs
screws (2).	Fingerprints and dust on the disc can cause
	poor picture quality and sound distortion. Before
	playing, clean the disc with a clean cloth. Wipe
	the disc from the center out.

2 2

2 2

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

6Reattach the shield panel with the ST3 screws (1) you previously removed.

Note

Never operate this product immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it. If you use this product in such a situation, it may damage tapes, discs, or internal parts.

1

1

Cleaning the cabinet

Wipe the front panel and other exterior surfaces of your TV with a soft cloth lightly dampened with lukewarm water.Never use a solvent or alcohol to clean your TV. Do not spray insecticide near your TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

Care and handling of discsHandling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Troubleshooting

TV

Problem	Solution
No picture or	• Check all cable connections.
sound	• Make sure that your TV is turned on.
Picture is OK, but	Check the volume level and mute setting.
no sound
Sound is OK, but	• Check the color control and adjust it.
no color	• Check the program's color features
	because it may be a black and white
	movie.
The picture has	Make sure that the antenna is installed correctly.
overlapped	If not, adjust the antenna toward the
images	broadcasting station.
Picture has snow	• Check the antenna and its connection. If
	there are problems, correct them. If all
	connections are tight, the problem may
	be with a faulty antenna or cable.
	• Check car traffic or neon signs that may
	disrupt the image.
Stripes on picture	Check for interference from other electronic
	devices, such as radios and televisions, and
	keep magnetic or electronic devices away from
	your TV.
Bad stereo or	A long broadcast distance, or interference from
SAP sound	radio waves, can cause bad sound reception. If
	so, change the mode to Mono.
Remote control	Remove obstacles between the remote control
does not work	and the player. Point the remote control at your
	TV's IR sensor. Install fresh batteries.
“Unsupported”	Check the resolution and frequency of your
appears on the	computer, and adjust it to the optimum
screen	resolution for this TV: 1440×900 at 60Hz.
“No Signal”	Make sure that the cable is firmly connected to
appears on the	the computer and TV.
screen
Image is not clear	Adjust the phase control.
Image is not	Adjust the horizontal control.
centered

www.insignia-products.com 33