InStep QE100A manual Extend and secure the tow bar

STEP 6 Extend and secure the tow bar

6A

Bracket

6B

6C

6D

6A. Lay the trailer on its side with the tow bar at the top and undo the lock pin from the bracket.

6B. Pivot the tow bar all the way forward until the shaft comes to rest in the front part of the bracket. 6C. Insert the lock pin shaft all the way through the forward holes in the bracket and tow bar.

6D. Hook the loop over the end of the shaft and make sure the pin is secure.

STEP 7 Attach the wheels to the quick-release brackets and make sure they are secure

7A 7B 7C

7A. Locate the rear wheel brackets on each side of the trailer and read the warnings carefully.

7B. Push one wheel axle completely through the bracket hole until you hear the axle click into place. 7C. IMPORTANT! Pull firmly on each wheel to ensure the lock mechanisms are securely engaged!

STEP 8 How to remove the rear wheels for transport or storage

8A 8B 8C

Release lever

8A. The release levers are located between the wheel bracket plates below the frame near the rear of the trailer. There is one lever on each bracket. They can be accessed from the rear.

8B. Release the axle by pulling the release lever straight out and holding it in place.

8C. Slide the wheel out of the bracket, then let go of the lever. Repeat for the other wheel.

5