To lower belly bar pull forward on the spring loaded latches (located on each side of the belly bar) then tilt down (Picture D).

Step 2. Rear Wheel Asembly

Push the wide end of the white retaining clip onto one end of the axle until it snaps into the groove. Press black cap onto retaining clip. Slide one rear wheel on the axle and insert the other end of the axle through both of the rear support holes (Picture E). Place the other rear wheel onto the axle (Picture F). Snap the retaining clip onto the axle then press on black cap onto clip (Picture G).

Step 3. Canopy Assembly

Place the canopy so that the rounded edge is positioned behind the headrest, then snap it onto the back of the headrest. Bend the canopy and snap both sides onto the belly bar (Picture H).

Assembly is now complete!

G

Cap

Retaining Clip

Rear Wheel

D

Locking Peg

Side Latches (not latched)

Spring Latches for Belly Bar

Cap over

ERetaining Clip Rear Wheel

 

Rear Support

 

Hole

 

Axle

 

Rear Support

 

Hole

 

 

 

 

F

Rear Wheel

 

Rear Axle

 

Rear Brake

 

 

H

Head

Rest

Snap

Side Latches

Latched

Belly Bar Snap

3

Page 3
Image 3
InStep SB150 manual Rear Wheel Asembly, Canopy Assembly