11
SN 29343136 DPS-5.2E
■Rear panel
■Display
TITLE CHAPTERTRACK REMAIN
LAST
COND.
DTS
REPEAT
DVD VCD
D
GUI
12345 67 89
~=-0
L
MONO
R
L
R
VIDEO
OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL COAXIAL
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
RS-232
AC INLET
DVD PLAYER
MODEL NO.
DPS-5.2
32145678 9
1£/8 indicator
2Inserted disc indicator
3TITLE indicator
4Angle icon indicator
5CHAPTER/TRACK indicator
6REPEAT indicator
7REMAIN indicator
8LAST indicator
9COND. indicator
0ŸD indicator
-DTS indicator
=GUI (Graphical User Interface) indicator
Indicates an on-screen menu operation is being performed. On-
screen menu helps you set up the player.
~Multifunctional indicator
(e.g. operating status and error messages)
1RS-232 port
This port is to be used in conjunction with an external controller to
control the operation of the DPS-5.2 using an external device.
2VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
3VIDEO OUTPUT S VIDEO jack [13]
If your TV or monitor has an S video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
4VIDEO OUTPUT COMPONENT jacks [13]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
5ANALOG OUTPUT jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both connections.
6DIGITAL OUTPUT OPTICAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
7DIGITAL OUTPUT COAXIAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
8z jack [14]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
9AC INLET [15]
Use to connect the power cord to the wall outlet.