Integra DPS-5.2 Use the cursor buttons 2/3 to adjust the settings, Press Display

5Use the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

6Repeat steps 4 and 5 to make adjustments to other settings.

If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.

Memory		Off	1	2 3
Move	ENTER Select		DISPLAY	Check

7When you are finished making adjustments, press ENTER to establish the new settings.

■Adjusting the picture quality settings

– To create your own setting (2)

1Use the cursor button (3) to select [Start] then press

ENTER.

Video Memory Select

Video Setup

2Use the cursor button (∞) to select [Video Setup] and press

ENTER.

3Press DISPLAY.

Fine Focus			On			Off
Contrast	min						max
Sharpness	soft						fine
Chroma Level	min						max
Hue	green						red
Memory		Off		1	2 3

4Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

5To memorize the setting, select Memory 1, 2, 3, then press

ENTER.

The previous setting will be erased.

45