526 Voice API for Windows Operating Systems Library Reference — November 2003
FEATURE_TABLE — feature information
•FT_ADPCM – supports ADPCM encoding
•FT_ADSI – supports Analog Display Services Interface (ADSI)
•FT_ALAW – supports A-law encoding
•FT_DRT6KHZ – supports 6 kHz sampling rate
•FT_DRT8KHZ – supports 8 kHz sampling rate
•FT_DRT11KHZ – supports 11 kHz sampling rate
•FT_FFT –
•FT_FSK_OH –
•FT_G729A – supports G.729a encoding
•FT_LINEAR – supports linear PCM encoding
•FT_MSGSM – supports Microsoft GSM encoding
•FT_PCM – supports PCM encoding
•FT_RESRVD1 – reserved
•FT_RESRVD2 – reserved
•FT_ULAW – supports mu-law encoding
ft_tone
Contains a bitmask of the tone features supported on the specified device.
•FT_GTDENABLED – supports global tone detection (GTD)
•FT_GTGENABLED – supports global tone generation (GTG)
•FT_CADENCE_TONE – supports cadenced tone generation
ft_e2p_brd_cfg
Contains a bitmask of the board configuration features supported on the specified device.
•FT_CONFERENCE – supports conferencing
•FT_CSP – supports continuous speech processing
•FT_DPD – supports dial pulse detection
•FT_ECR – supports echo cancellation resource
•FT_SYNTELLECT – supports Syntellect patent protection
ft_fax
Contains a bitmask of the board type and fax features supported on the specified device.
•FT_FAX – specifies that the device has a fax daughterboard
•FT_RS_SHARE – supports fax resource sharing
•FT_VFX40 – specifies that the device is a VFX/40 fax board
•FT_VFX40E – specifies that the device is a VFX/40E fax board
•FT_VFX40E_PLUS – specifies that the device is a VFX/40ESCplus or VFX/PCI board
•FT_FAX_EXT_TBL – specifies send fax and receive fax feature support.
On Springware boards, if this bit is turned on and the FT_SENDFAX_TXFILE_ASCII
bit (in ft_send) is turned on, then the device supports DSP Fax (also known as Softfax).
On DM3 boards, if the ft_fax field contains the bitmask FT_FAX | FT_VFX40 |
FT_VFX40E | FT_VFX40E_PLUS, then this device supports fax.
ft_front_end
Contains a bitmask of the front-end features supported on the specified device.
On DM3 boards, one or more of the following may be returned:
•FT_ANALOG_CID – returned by the Intel® Dialogic® DMV160LP board
•FT_CAS – supports CAS
•FT_ISDN – supports ISDN
•FT_R2MF – supports R2/MF signaling