Intel 05-2342-002 4.1 Starting the Demo

Voice API for Linux Demo Guide — June 2005 13

4.Running the Demos

This chapter describes how to run the voice demos. Topics include:

•Starting the Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

•Demo Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

•Using the Demo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

•Stopping the Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.1 Starting the Demo

The following sections provide information on starting the voice demos.

•Starting the cbansr demo

•Starting the pansr demo

•Starting the custserv demo

•Starting the dpddemo

•Starting the d40demo

To run the cbansr demo, follow these instructions:

1. Open a command prompt window and go to the directory where the demo is located. The

default location is the /demos/dx_demos/ansr directory under INTEL_DIALOGIC_DIR (the

environment variable for the directory in which the system release software was installed).

2. At the command prompt, type

./cbansr -<option>

For a list of command line options, type

./cbansr -?

Note: On Linux, the demo name is case-sensitive and must be entered as shown.

The demo options are described in Table 1, “Voice Demo Options”, on page15. If you don’t

specify an option, default options are assumed.