Intel 10 Gigabit AF DA Dual Port Server Adapte manual Specifications, General

Specifications

General

Product code	E10G42AFDA
Connectors	SFP+ connectors
Cabling	• SFP+ direct attached cable
	(twinaxial) only
	• Other SFP+ optics are not allowed
	and cannot be used with this adapter

Adapter Product Features

Intel® PROSet Utility	• For easy configuration and
	management
Intel® lead-free4technology	•
Plug and play specification support	Standard
Intel® I/OAT2 including QuickData	•
Ships with full-height bracket installed,	•
low-profile bracket added in package
RoHs3	•
Receive-side scaling	•
VMDq1	In a virtualized environment, packets
	dedicated to different virtual machines
	can be routed to different queues, thus
	easing the routing of these packets to
	the target machine
Advanced packet filtering (per port)	• 16 exact-matched packets
	(unicast or multicast)
	• 4096-bit hash filter for
	multicast frames
	• Promiscuous (unicast and multicast)
	transfer mode support
	• Optional filtering of invalid frames
Direct Cache Access (DCA)	The I/O device activates a pre-fetch
	engine in the CPU that loads the data
	into the CPU cache ahead of time,
	before use, eliminating cache misses
	and reducing CPU load

Network Management

DMI 2.0 support, Windows Management	•
Instrumentation (WMI) and SNMP
Remote Installation Services (RIS)	•
PXE 2.0 enabled through boot Read-Only	•
Memory (ROM)

Network Operating Systems (NOS) Software Support

Microsoft Windows* 2003 Server	IA32, X64
Microsoft Vista*	IA32, X64, IPF
Windows Virtual Server* 2005	IA32, X64, IPF
Red Hat Linux* 2.6x or later	IA32, X64, IPF
SUSE SLES 10* or later, Professional 9.2	IA32, X64, IPF
or later
FreeBSD* 5.x or later	IA32, X64, IPF
ESX 3.x* support (for VMware)	IA32, X64, IPF
Fedora*	IA32, X64, IPF
EFI 1.1*	IA32, X64, IPF

Intel Backing

Limited lifetime warranty	•
90-day, money-back guarantee	•
(U.S. and Canada)

Advanced Software Features

Adapter Fault Tolerance (AFT)	•
Switch Fault Tolerance (SFT)	•
Adaptive Load Balancing (ALB)	•
Teaming support	•
IEEE 802.3ae*5	•
Test switch configuration	Tested with major switch original
	equipment manufacturers (OEMs)
PCIe Hot Plug*/Active Peripheral	•
Component Interconnect (PCI)
IEEE 802.1Q* VLANs	•
IEEE 802.3 2005* flow control support	•
Tx/Rx IP, TCP, & UDP checksum 0 offloading	•
(IPv4, IPv6) capabilities control protocol (TCP),
user datagram protocol (UDP), Internet
protocol (IP)
IEEE 802.1p*	•
TCP segmentation/large send offload	•
MSI-X supports Multiple Independent Queues	•
Interrupt moderation	•
IPv6 offloading	Checksum and segmentation capability
	extended to new standard packet type

Technical Features

Data rate supported per port	10 Gigabit
Bus type	PCI Express 2.0 (2.5 GT/s)
Bus width	x8 lane PCI Express, operable in x4,6 x8
	and x16 slots
Bus speed (x8, encoded rate)	20 Gbps uni-directional; 40 Gbps
	bi-directional
Interrupt levels	INTA, INTB, INTC, INTD
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor	Intel® 82598EB
Typical power consumption	• 12.2 W maximum power, 10.1 W
	typical power
	• PCI Express +3.3 V power supply –
	consumes 2.3 A max, 1.7 A typical
	• PCI Express +12 V power supply –
	consumes 0.4 A max, 0.4 A typical
Airflow	150 LFM (Linear Feet per Minute)
Operating temperature	0° C to 55° C (32° F to 131° F) with
	100 LFM forced airflow (linear feet
	per minute)
Storage temperature	-40° C to 70° C (-40° F to 158° F)
Storage humidity	90% non-condensing relative humidity
	at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking)

Physical Dimensions

Length	16.74 cm (6.59 in)
Width	6.89 cm (2.71 in)
Height of end bracket	PCI Express standard, 12 cm (4.725 in)
	PCI Express low-profile, 7.92 cm (3.12 in)