** Get and configure Intel® PAT Agent:
The Intel® PAT 4.x Agent exists on the server, while previous versions existed in client firmware. To get and configure the Intel® PAT Agent. Please note:
•Make sure you have installed Intel® PAT Server
•Make sure all clients are correctly connected to the LAN
•You may need to configure the DHCP service**
•You need to enter each client BIOS, setting the boot option to Boot from PXE
•After installing the Intel® PAT Client (or deploying an image containing the Intel® PAT client.), the Intel® PAT Agent will exist on local client machines. You do not need to repeat the download process.
•After the deployment, enter client BIOS again and set the boot option to Normal Boot
•After the Intel® PAT Agent download, you can press F4 to run Intel(R) PAT Agent when the screen displays "Press F4 to enter Intel(R) PAT Agent…" After that, you can press Any Key in the first 3 seconds when screen displays " Press any key to enter configure window..."
For the detailed steps of DHCP Service configuration, see the Intel® PAT Server Online Help.
2.2Modularized Installation 1: Only Use Hard Disk
Restore
If you do not manage clients through Intel® PAT Server, you can still install Intel® PAT Client to use the hard disk restore function.
You can click client setup.exe and follow
If you still want to use Intel® PAT Server after installing Intel® PAT Client on the clients, follow these steps to manage your clients:
Step 1. Install Intel® PAT Server
•Install Intel® PAT Server on the server and complete Server License Activation
•Configure Internet Explorer* on the server to support JavaScript*. The Intel® PAT Server requires JavaScript support.
Step 2. Configure Intel® PAT Agent
•Configure each client: If you choose automatic configuration, you need to set the server to obtain an IP address automatically. If you choose manual configuration, enter computer ID and assign an IP address manually to clients
Step 3. Accept Clients
•Accept new clients on the server
•Set golden machine and boot it to OS
6