Intel 500 manual A P T E R 1 Quick Start

C H A P T E R 1 Quick Start

2Turn off the power to the switch. Remove the plate covering the slot on the Express 500 Series Switch.

Note For 510T, use Slot A. For 550T and 550F, use either slot

Slot A

1

2

3

Slot B 4

5

6

7

8

Intel
550FExpress
Switch
Status
Temper	ature
RPS		Power
		Reset
		Console
		9600-
		8-N-1

1704

3Insert the Stack Interface Module into the slot. Place your thumbs just beneath the screws on the front plate of the module and push the module in until it clicks into position. Secure it using the retaining screws.

Note If the module does not click into position, refer to the Intel Support Web Page (http://support.intel.com) for full instructions on how to install the module success- fully.

Stack	Interface
		Module
			for 500
				Series
					Switches

Slot A

1

2

3

Slot B 4

5

6

7

8

Intel
550FExpress
Switch
Status
Temper	ature
RPS		Power
		Reset
		Console
		9600-
		8-N-1

4Using another Express 500 Series Switch, repeat steps 1 to 3 with another Stack Interface Module.

2