Red Hat Linux
For installation on systems using Red Hat Linux, be aware of the following:
•Remote ISC installation is not available.
•Additional steps are required to configure the Linux DMI service provider.
•Additional steps are required to configure the
Windows 2000
When upgrading to ISC 3.1, the previously installed service partition must be removed and recreated using utilities supplied with ISC 3.1. The system BIOS must also be upgraded.
LSC, LDSM, Windows, NetWare, and UnixWare Installation
The ISC package contains both the console and instrumentation software. To install, launch ISCSetup.exe if it is downloaded from the web or Launch Binaries\Setup.exe if it is from a
•Each Windows 2000/NT server automatically reboots.
•Each NetWare, UnixWare, or Linux server requires manual reboot.
1.Login with system administrator access.
2.Verify the HP OpenView is not running.
3.Do steps 4 and 5 then skip step 6 if you are installing from the Software Kit CD. Skip to step 6 if you are installing from a download from the web.
4.At the console, insert the Software Kit CD into the CD ROM reader.
5.Run the program x:\binaries\setup.exe, where x in the drive letter of your CD ROM reader.
6.Run the program ISCsetup.exe from the ISC download directory.
7.Note this installation may require multiple server reboots.
When installation is complete, view the file logfile in the install directory of each server and console to verify that ISC installed correctly.
Red Hat Linux Installation
There are three steps to the Red Hat Linux installation process:
•Installing Linux DMI server provider
•Installing ISC
•Configuring the SNMP_DMI mapper
16 | Installation Guide for the Intel Server Control |
