6.3Advance BIOS Features
CPU L1&L2 Cache Leave these items enabled since all the processors that can be installed on this board have internal L2 cache memory
First Boot Device when system
Second/ third boot device when system
Boot other Device if you enable this item the system will also search for other boot devices if it fails to find an operating system from the first two locations.
Swap floppy drive if you have two diskette drives installed and you enable this item drive A becomes drive installed and you enable this item drive A becomes drive B and drive B becomes drive A
6.4Advanced Chipset Features
DRAM Timing Selectable
| BIOS auto detect by SPD | Default: Manuel | ||
| CAS latency Time |
|
|
|
| Set up memory read order wait time | Default: 2.5 |
| |
Active to Pecharge Delay |
|
|
| |
| Control DRAM running Pecharge delay time option |
| Default:6 | |
| DRAM RAS |
|
|
|
| Control DRAM startup read and write order | Default:3 |
| |
| Memory Frequence for |
|
|
|
| Memory frequecce enabled select DDR200/DDR266 | Default: AUTO | ||
| System BIOS Cacheable |
|
|
|
| If enable system BIOS read cache | Default: Disabled | ||
| Video BIOS Cacheable |
|
|
|
| If enable Video BIOS read cache | Default: Disabled | ||
| Delayed Transaction |
|
|
|
| Enable ICH2 will be delayed | Default: Disabled | ||
Delayed prior to Thermal |
|
|
| |
| Enable system detect DRAM temperature time | Default: 16min | ||
| AGP Aperture Size(MB) |
|
|
|
| Select AGP capability | Default: 64MB | ||
6.5 Integrated peripherals |
|
|
| |
|
|
|
| |
| Chipset inside the first/ second channel of PCI IDE interface | Default: Enabled | ||
IDE Primary / Secondary Master slave PIO |
|
|
| |
| The first/ second IDE primary master/ primary slave control PIO |
| ||
| Mode |
| Default: Auto |
USB Controller
Setup USB controller Default: Enabled
USB Keyboard Support
Setup Support USB keyboard | Default: Disabled |
AC97 Audio |
|
If use AC97 sound chipset | Default: Audio |
Init Display First
When
Onboard FDC Controller
| Setup onboard FDC controller | Default: Enabled |
Onboard serial port ½ |
| |
| Setup onboard serial port ½ | Default: 3F8/IRQ4 |
| UART Mode select |
|
| Setup UART mode select | Default: Normal |
| Onboard paralled Port |
|