Step 2: Install memory modules
Before installing the m emory modules, adhere to the following warning:
1 . When DIMM LED is ON, do not install / remove DIMM from socket.
2 . Please note that the DIMM module can only fit in one direction due to the one notch. Wrong orientation will cause improper installation. Please change the insert orientation.
The motherboard has 2 dual inline memory m odule (DIM M) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket. The DIM M module can only fit in one direction due to the notch. M emory size can vary between sockets.
Notch 
|
| DDR |
Support Unbuffered DDR DIMM Sizes type: |
| |
64 Mbit (2Mx8x4 banks) | 64 Mbit (1Mx16x4 banks) | 128 Mbit(4Mx8x4 banks) |
|
|
|
128Mbit(2Mx16x4 banks) | 256 Mbit(8Mx8x4 banks) | 256Mbit(4Mx16x4 banks) |
|
|
|
512Mbit(16Mx8x4 banks) | 512Mbit(8Mx16x4 banks) |
|
|
|
|
1 . The DIM M socket has a notch, so the DIM M memory module can only fit in one direction.
2 . Insert the DIMM m emory module vertically into the DIM M socket. Then push it down.
3 . Close the plastic clip at both edges of the DIMM sockets to lock the DIM M m odule.
Reverse the installation steps when you wish to rem ove the DIM M module.
English
- 11 - | Hardware Installation Process |
