Intel Desktop Board DZ68BC Product Guide
Removing a PCI Express x16 Graphics Card
Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1.Observe the precautions in "Before You Begin" on page 31.
2.Remove the screw (Figure 21, A) that secures the card’s metal bracket to the chassis back panel.
3.Push the card ejector lever down using the tip of a pencil or similar tool (Figure 21, B) in the notch. This will release the card from the connector (C).
4.Pull the card straight up to remove it.
Figure 21. Removing a PCI Express x16 Graphics Card
Installing Linked PCI Express Graphics Cards
The Desktop Board supports technology that allows you to install linked PCI Express graphics cards such as NVIDIA* SLI* (Scalable Link Interface) cards. Make sure you use two identical
46
