CA810 Motherboard Product Guide
How to Install and Remove the Motherboard
Refer to your chassis manual for instructions on installing and removing the motherboard. On a microATX chassis, the motherboard is secured to the chassis by eight screws. Figure 4 shows the locations of the mounting screw holes. On a standard ATX chassis, the motherboard is secured to the chassis by seven screws and the provided standoff (see Figure 5).
✏NOTES
You will need a Phillips (#2 bit) screwdriver.
Refer to Appendix B for regulatory requirements and installation instructions and precautions.
WARNING
This procedure should be done only by qualified technical personnel. Disconnect the computer from its power source before doing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage.
OM07790
Figure 4. Mounting Screw Holes
22