Intel CV702A, CV700A manual 2-1Unpacking Precaution, Hardware Installation

Chapter-2

Hardware Installation

This chapter provides the information how to install the hardware of CV700A. Please follow section 1-4, 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure.

2-1 Unpacking Precaution

The CV700A board has been well packed with an anti-static bag to protect its sensitive components and circuitry from damage due to static electric discharge.

NOTE!

1.Do not touch the board or any other sensitive components without all necessary anti-static protection.

2.Please pay attention to the voltage limitation of DC-IN12 V +- 5 %. Overuse of DC-IN voltage limitation or change to another power adapter ( not provided with this system ) will VOID warranty.

You should follow these

steps to protect the board from the static electric discharge whenever you handle the board:

1.Ground yourself by a grounded wrist strap at all times when you handle the CV700A. Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from a grounded object. Please put on and connect the strap before handling the CV700A for harmlessly discharge any static electricity through the strap.

2.Please use anti-static pad to put any components, parts, or tools on the pad whenever you work on them outside the computer. You may also use the anti-static bag instead of the pad. Please ask your local supplier for necessary parts on anti-static requirement.

3.Do not plug any connector or set any jumper when the power is on.

10