Installing and Replacing Desktop Board Components
Installing and Removing a Processor
Instructions on how to install a processor to the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 20). Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1.Observe the precautions in "Before You Begin" on page 23.
2.Open the socket lever by pushing the lever down and away from the socket (see Figure 6, A and B).
A
B
OM17210
Figure 6. Lift Socket Lever
3. Lift the load plate. Do not touch the socket contacts (see Figure 7, C and D)
C
D
D
OM17211
Figure 7. Lift the Load Plate and Don’t Touch the Socket Contacts
27
