Contents
Figures |
| |
1. | Intel Desktop Board D102GGC2 Components | 11 |
2. | LAN Connector LEDs | 16 |
3. | Location of the Standby Power Indicator | 20 |
4. | Installing the I/O Shield | 25 |
5. | Desktop Board D102GGC2 Mounting Screw Hole Locations | 26 |
6. | Lift Socket Lever | 27 |
7. | Lift the Load Plate and Don’t Touch the Socket Contacts | 27 |
8. | Remove the Protective Socket Cover | 28 |
9. | Remove the Processor from the Protective Processor Cover/Do Not Touch | 28 |
10. | Install Processor | 29 |
11. | Close the Load Plate | 29 |
12. | Connecting the Processor Fan Heat Sink Cable to the Processor Fan Connector | 30 |
13. | Use DDR DIMMs | 31 |
14. | Installing a DIMM | 32 |
15. | Installing a PCI Express x16 Card | 34 |
16. | Removing a PCI Express x16 Card | 35 |
17. | Connecting the IDE Cable | 36 |
18. | Connecting the Serial ATA Cable | 37 |
19. | Internal Headers | 38 |
20. | Back Panel Audio Connectors for a Flexible | 41 |
21. | Location of the Chassis Fan Headers | 42 |
22. | Connecting 2 x 12 Power Supply Cables | 43 |
23. | Location of Other Connectors on Desktop Board D102GGC2 | 44 |
24. | Location of the BIOS Configuration Jumper Block | 45 |
25. | Removing the Battery | 51 |
Tables |
| |
1. | Feature Summary | 9 |
2. | Desktop Boards D102GGC2 Components | 12 |
3. | Power Supply Requirements | 13 |
4. | 16 | |
5. | Front Panel Audio Header Signal Names for High Definition Audio | 39 |
6. | AC ’97 Audio Header Signal Names | 39 |
7. | 40 | |
8. | Front Panel Header Signal Names | 40 |
9. | Jumper Settings for the BIOS Setup Program Modes | 46 |
10. | Beep Codes | 55 |
11. | BIOS Error Messages | 55 |
12. | Safety Regulations | 57 |
13. | 61 | |
14. | EMC Regulations | 62 |
15. | Product Certification Markings | 63 |
vii