Embedded Intel® Atom Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual
110
6. Write the im age to the USB stick by selecting Write.
7. Insert the USB stick into the CRB.
8. When you boot the BIOS be sure to select the USB stick as the primary boot drive.
9. When the Boot: prompt appears, you must type install to install to the attached
SATA drive.
a. Note this prompt only remains on the screen for a few seconds, so you need to
be prepared for it.
10. You will be asked to confirm the drive you intend to install Yocto Project on.
Type ‗Y‘ at the prompt to complete the installation to the drive.
Note: The Yocto Project install will assume the entre drive will be used for Yocto
Project. Dual boot options, discovery of existing partitions and OSs are not enabled.
7.6.4 Install with CD or DVD
Currently installing via CD or DVD is not enabled.
7.6.5 Graphics Driver
The preliminary Yocto Project* BSP graphics driver will be based on the standard Linux
VESA driver. This VESA driver will not be able to take advantage of Intel‘s graphics
engine. Closed source hardware accelerated graphics drivers will be incorporated into
future releases of the Yocto Project* BSP.