Intel Desktop Board DP965LT Product Guide
14
Main Memory
NOTE
To be fully compliant with all applicable Intel ® SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The desktop board supports the dual or single channel memory configurations defined
below.
Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module
(DIMM) connectors with gold-plated contacts.
Support for:
Unbuffered, non-registered single or double-sided DIMMs
Non-ECC DDR2 800/667/533 MHz memory
Serial Presence Detect (SPD) memory only
Memory configurations listed below:
Up to 2.0 GB utilizing 256 Mb technology
Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
Up to 8.0 GB utilizing 1 Gb technology
Related Links:
Go to the following links or pages for more information about:
The latest list of tested memory,
http://support.intel.com/support/motherboards/desktop/
SDRAM specifications, http://www.intel.com/technology/memory/
Installing memory, page 33 in Chapter 2
Intel® P965 Express Chipset
The Intel P965 Express Chipset consists of the following devices:
Intel P965 Express Chipset Memory Controller Hub (MCH)
Intel 82801HB I/O Controller Hub (ICH8)
Related Links:
Go to the following link for more information about the Intel P965 Express Chipset:
http://developer.intel.com/design/nav/pcserver.htm