SSI
EPS1U Power Supply Design Guide, V1.1
4.2Alternate Enclosure
STATUS
Small Power Form Factor
Systems may require a smaller power supply enclosure. Figure 2 details a smaller power supply enclosure for such systems. This form factor accommodates power levels of 250W and 125W. The supply will provide output power via a wire harness out the interior face of the supply. Refer to the Entry Electronics Bay Specification at the SSI web site (http://www.ssiforum.org/docs/entry_elecbay_spec_v2_0.pdf) for possible output connector configurations. Due to different system board layouts the wire harness length may vary.
53.0 +/- 0.2
106.0 +/- 0.2
(PWR/Fail) IEC Connector
Center Line
40.0 | Fan | AC I/P | Fan |
Exterior Face
16.4+/- 0.2
IEC Connector
IEC Connector
Center Line
215.0+/-0.2
Interior Face
All dimensions are in millimeters.