2-4

Power Management Setup

 

 

 

 

 

 

 

 

 

 

 

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

 

 

 

 

 

Power Management Setup

 

 

 

ACPI Suspend Type

 

[S1(POS)]

 

Item Help

 

Power LED in S1 state

[Blinking]

 

Menu Level`

 

Off by Power button

 

[Instant-off]

 

 

 

AC BACK Function

 

[Soft-Off]

 

 

 

 

PME Event Wake Up

[Enabled]

 

 

 

 

ModemRingOn/WakeOnLan

[Enabled]

 

 

 

 

Resume by Alarm

 

[Disabled]

 

 

 

x

Date (of Month) Alarm

Everday

 

 

 

x

Time (hh:mm:ss) Alarm

0 : 0 : 0

 

 

 

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

 

F5: Previous Values

F6: Fail-Safe Defaults

 

F7: Optimized Defaults

 

 

 

 

 

 

 

ACPI Suspend Type

 

 

 

 

 

S1(POS)

 

Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)

 

S3(STR)

 

Set ACPI suspend type to S3/STR(Suspend To RAM).

 

 

Power LED in S1 state

 

 

 

 

 

Blinking

 

In standby mode(S1), poer LED will blink. (Default value)

 

 

Dual/OFF

 

In standby mode(S1):

 

 

 

 

 

 

a. If use single color LED, power LED will turn off.

 

 

 

 

b. If use dual color LED, power LED will turn to another color.

 

 

Off by Power button

 

 

 

 

 

Instant-off

 

Press power button then Power off instantly. (Default value)

 

 

Delay 4 Sec.

Press power button 4 sec. to Power off. Enter suspend if button is pressed less than

4seconds.

AC BACK Function

Soft-Off

When AC-power back to the system, the system will be in "Off" state.

 

(Default value)

Full-On

When AC-power back to the system, the system always in "On" state.

Memory

When AC-power back to the system, the system will return to the Last state

 

before AC-power off.

PME Event Wake Up

This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.

Disabled

Disable this function.

Enabled

Enable PME as wake up event. (Default value)

ModemRingOn/WakeOnLan

An incoming call via modem can awake the system from any suspend state or an input signal comes from the other client server on the LAN can awake the system from any suspend state.

Disabled

Disable Modem Ring On / Wake On LAN function.

Enabled

Enable Modem Ring On / Wake On LAN function. (Default value)

English

- 37 -

BIOS Setup

Page 37
Image 37
Intel GA-8I865GVMK-775 user manual Power Management Setup, AC Back Function, PME Event Wake Up, ModemRingOn/WakeOnLan