English
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal | Set onboard I/O chip UART to normal mode. (Default value) |
IrDA | Set onboard I/O chip UART to IrDA mode. |
ASKIR | Set onboard I/O chip UART to ASKIR mode. |
UR2 Duplex Mode |
|
This feature allows you to seclect IR mode. | |
This function will available when "UART Mode Select" doesn't set at Normal. | |
Half | IR Function Duplex Half. (Default value) |
Full | IR Function Duplex Full. |
Onboard Parallel port | |
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode |
|
SPP | Using Parallel port as Standard Parallel Port. |
EPP1.9+SPP | Using Parallel port as Enhanced Parallel Port 1.9 and SPP mode. |
ECP | Using Parallel port as Extended Capabilities Port. |
EPP1.9+ECP | Using Parallel port as Enhanced Parallel Port 1.9 and ECP mode. |
PRINTER | Using Parallel port as printer port. (Default value) |
EPP1.7+SPP | Using Parallel port as Enhanced Parallel Port 1.7 and SPP mode. |
EPP1.7+ECP | Using Parallel port as Enhanced Parallel Port 1.7 and ECP mode. |
ECP Mode Use DMA | |
3 | Set ECP Mode Use DMA to 3. (Default value) |
1 | Set ECP Mode Use DMA to 1. |
- 36 - |
