| Hardware Setup | |
To setup the LCD, you need the component below: |
| |
1. | A panel with LVDS interfaces. |
|
2. | An inverter for panel’s backlight power. |
|
3. | A LCD cable and an inverter cable. |
|
For the cables, please follow the pin assignment of the connector to make a cable, because every panel has its own pin assignment, so we do not provide a standard cable; please find a local cable manufacture to make cables.
LCD Installation Guide:
1.Preparing the HS-872P, LCD panel and the backlight inverter.
2.Please check the datasheet of the panel to see the voltage of the panel, and set the jumper JVLCD to +5V or +3.3V.
3.You would need a LVDS type cable.
Panel side | Board side |
For sample illustrator only
4.To connect all of the devices well.
24 | Digital Display |
